Kriya Tech

The Haimer Centro is a very precise and versatile coaxial indicator to center bore and arbor.

Center bores and arbores quick and precise

• The Centro is clamped in a tool holder and positioned close the sought axis. The probe tip is adjusted and touches the bore or arbor all the way around.

Dial gauge always in field of vision

• With low rpm the probe slides along the bore or arbor. Its movement is transferred to the dial gauge. By using an antenna the Centro does not spin around and stays in field of vision.

By using the Centro you find the axis of bores or arbors - reliably

• As long as the spindle is out of the center of the bore or arbor the hands of the dial gauge stay in movement. By changing the position of x- and y- axis at the machine you can jibe the axis of the spindle and the work piece.

Further advantages:

• Check the axial run-out of the work piece to the spindle
• Compensation of the run-out errors of the spindle and tool holder >> No adjustment necessary
• Even in bigger distance the unusual size of the dial gauge is helpful to finish the job
• Replaceable probes

Main Features

• Quick and exact centering of borings and shafts
• Replaceable probes for maximum flexibility

The Universal 3D-Sensor is a very precise and versatile measuring instrument for milling and EDM machines (insulated probe).

The 3D-Sensor is clamped into a tool holder and inserted into a milling spindle. Once clamped into the machine spindle, the run-out (T.I.R) is fully adjustable to Zero. Then, you are able to find exact positioning of the spindle axis on the edges of the workpiece. This allows for zeros to be set and the length to be measured quickly and easily. You may approach in any direction (X-, Y-, Z- axis – hence the name „3D-Sensor“). When the dial gage shows zero, the spindle axis is exactly on the workpiece edge.

Only the Haimer 3D-Sensor allows for the edge to be found on the first attempt. No calculating of the probe ball diameter is necessary – just Zero it out Problems with mathematics or calculations are eliminated, allowing for fewer operator errors. Our 3D-Sensor is quick and easy, reducing the extra time needed with most edge-finders, increasing the productivity and accuracy of the operator.

Simply bring the needle to Zero, and that is your edge with any probe. The accuracy is such that you are able to inspect your parts right on the machine. Tram vises, find the center of your bore, find your edge and inspect parts - it is all possible with the Haimer 3D-Sensor. The unit has a large overrun distance in connection with the fully tested preset breaking points giving the sensor long life. All Universal 3D-Sensors are individually tested and adjusted when being assembled in order to achieve a maximum of measuring precision.

Main Features

• Exact positioning of the spindle axis on the edges of the workpiece
• Replaceable probes for maximum flexibility

The Digital 3D-Sensor is a further development of the time proven mechanical 3D-Sensor. It serves for approaching workpiece edges on milling and EDM machines.

The spindle may be positioned quickly and safely on the references edge. The approaching operation can be exactly monitored on the digital display. The zero points can be set without any calculations because the spindle axis is positioned exactly on the approached edge.

The digital display has large numbers that measure in increments of 0.001 mm. It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is water- and dust-proofed according to IP 64 and can be stored in the tool magazine of the machine.

Main Features

• Exact positioning of the spindle axis on the edges of the workpiece
• Replaceable probes for maximum flexibility
• Dust and waterproof

With it´s fully automated measurement operation, UNO automatic drive, the high-end model of the UNO series is fully independent of the operator and can be used with minimal user expertise.

This guarantees maximum quality and time saving, even with complex tools on several planes.

• Image processing system Microvision UNO
• Automatic tool measurement in 3 axes
• SK50 ultra-high precision spindle, autofocus
• Motorised fine adjustment
• 24" touch screen
• 4 × 90° and 3 x 120° motor-driven indexing
• Spindle brake
• Vacuum clamping
• Premium base cabinet incl. storage for six adapters
• Sigma function
• Memory for 1.000 zero points, tools and tool lists
• USB / LAN data output
• Release-by-touch
• Edgefinder
• Label printer
• Incident light
• 2 μm spindle runout
• ± 2 μm repeatability

Equipment Options

• SS-U universal ultra-high precision spindle with automatic adapter identification Order no. M-S1030
• Turning package: Second camera incl. indexing, 4 × 90°, and 3 × 120° motor driven Order no. M-F1014 or M-F1016
• Bidirectional interface Order no. M-P1516
• Manual RFID-System Order no. M-P1504
• Individual release and clamping of X/Y-axis Order no. M-P4160
• Post-processor Order no. M-P1510 M-P1511, M-P4150, M-P1303, M-P1304, M-P1305
• HQR-Connect Order no. M-P1551
• HRFID-Connect Order no. M-P1552
• Reamer module for guided reamer Order no. M-P5010
• Measured value history Order no. M-P5008